How to remove a wardrobe door

Sliding wardrobe - a practical piece of furniture, which has undeniable advantages over swing counterparts. It makes it possible to save free space, convenient in operation, has many variations of finishes, however, at the same time, the cost of products is not difficult to call low. This is due to the high cost of the sliding mechanisms, a significant amount of time and effort to assemble, as well as further installation. Costs await the owner, and in the event of a breakdown of any element, it is much more difficult to disassemble the furniture than to assemble it.How to remove the closet door so that they remain unharmed? All work can be done independently, especially if in this case you are ashamed to use the services of a master or want to save a little. Removing the sliding doors from the cabinet with your own hands is not a problem.

Sliding door mechanism

Having ventured to such a risky event, you need to examine the mechanism, first of all - one decisive attitude and motivation is not enough. There are only two principles for installing doors on a wardrobe:

• Cheap and not very popular, besides the quality is in doubt. Doors are mounted in a hinged manner and their movement occurs along the upper rail.
• Reliable and widespread, as well as more expensive. The movement of the doors is ensured by the lower rail, which takes up a large load, and the upper one carries out the guiding function.

REFERENCE. The first type of mechanism is equipped with small cabinets, the doors of which do not have significant weight. The second is high-quality and reliable products, since in this case the shutters are firmly fixed and malfunctions are almost impossible.

Disassemble the wardrobe

Manufacturers try to simplify the process of assembling and disassembling furniture as much as possible, so for work you only need a screwdriver and an assistant. In addition, it is recommended to immediately prepare a container for storing self-tapping screws and other small parts, as well as record the sequence of actions. Before dismantling, it is necessary to remove all things, remove the drawers and shelves. The same applies to glass elements, mirrors.

We remove the doors

The process requires care and accuracy, especially if the doors have a fixed mirror surface. Careless movement or rush can lead to damage, and therefore to additional costs. Procedure:

1. You should start with the first door, which you need to slightly raise and pry the lower rollers with a screwdriver.
2. Further, the door is slightly extended towards itself, and its lower part extends beyond the lower rail. Excessive force is contraindicated here, otherwise the upper guide may become deformed.
3. In conclusion, you need to lower the door down at a slight angle - while it will easily come out of the upper rail.

The second door is removed in the same sequence. With an assistant, things will go much faster, and the likelihood of damage to something will be much lower. If the wardrobe is equipped with hinged doors, the procedure for removing them is slightly different. To do this, you need a wrench to loosen the clamping bolts. Next, slightly pull the sash towards you and carefully remove it from the grooves. More expensive cabinets can be equipped with additional equipment, for example, closers, latches, an additional frame. In the case of closers and a latch, you should start with them, and in structures with a frame it is necessary to remove its fixing parts, which will allow the doors to easily roll out.

Dismantle the shelves

Furniture shelves are arranged horizontally and designed to store things, while their fastening occurs with a variety of accessories:

• the eccentrics are removed using a Phillips screwdriver and are located under the shelves, which are removed by moving up;
• European-style screws require a hex wrench, which first unscrews the end mounts, and then the side;
• when fixing the shelf with hexagons, you will need to remove the covers of the plastic elements, and then unscrew the screws.

NOTE. Most often, fasteners are small in order to be as inconspicuous as possible in the structure, so you should fold them carefully so as not to lose.

We remove the partitions and the back wall

In conclusion, it is necessary to remove the partitions, guided by the same principle as with the shelves. Difficulties with them should not arise, which can not be said about the back wall, which is sometimes fastened in a tricky way:

• if the wall is attached to everything that is possible (the base, the ends of the shelves), then all fasteners, which can be many, should be removed;
• in case of fixing to the furniture cover and side walls, it will be possible to remove the wall only when the frame is disassembled.

In order to avoid problems associated with returning the cabinet to its original form, it’s nice to fix the sequence of actions or use the instructions, which are often included.

Process features and expert advice

Particular difficulties during the dismantling of the wardrobe should not arise if all the actions are carried out carefully and slowly. As for the advice from the masters, then, first of all, they recommend determining what materials the furniture elements are made of. For example, if the back wall is made of fiberboard, then efforts should be made so as not to damage it, or removed first, if possible. The material does not differ in strength and a dent or crack may appear on it. If the wardrobe is attached to the wall, then you must first disconnect it, otherwise there will be no access to the rear wall. In furniture, consisting of several parts, each element is disassembled in turn, and if it is equipped with a mezzanine, then it must first be removed. The key to success is simple, as is the case with any furniture - all actions must be performed carefully and in strict sequence. Only in this way you can disassemble the cabinet without damaging anything, and then assemble it without any difficulties.